Water Conductivity Meter
Model II with longer conductivity probes: Now its easier than
ever to use our Water Conductivity Meter! Model II comes with longer probes
that makes it a simple task to get a good reading.
The LED (light emitting diode) indicates electric current in
the following way when both the probes are immersed in water. Note that when
you dip the probes into the water you are supposed to hold the ON button
inn, this turns the LED green when in the air. Therefore every test
starts with a green light.
- Green light (no change) - Non conductor (approximately 0 to 2 PPM)
- Dimmer green LED - the light gets gradually dimmer until it shuts off.
- No light (the LED turns off) - Weak conductor (approximately 10 to 12 PPM)
- Red light (the LED changes to red)- Stronger conductor (approximately 15
and more PPM)
A popular scale used by water treatment specialists is parts per million (PPM)
of total dissolved solids (TDS). When using TDS scales, it must be remembered
that TDS readings are only approximate. PPM or TDS is a measurement by weight
for a given volume of a specific solution (sodium chloride, potassium chloride,
etc.) Natural water contains a mixture of different dissolved solids (salts).
Because these salts have different electrical conductivity values, we use an
"average" to express PPM.
Features of the Compact LED Conductivity Tester
- Compact size
- Dimension: 1.25" (L) x 0.25" (W) x 3/8" (H)
- Weight: 0.5 oz
- Long battery life enough for over 200 tests (included)
- Factory tested
- Snaps on to key ring
Using the LED Water Conductivity Meter
- Test the conductivity of the substance by immersing the tips of the two
probes completely into the water to be tested. Note that when you dip the
probes into the water you are supposed to hold the ON button inn,
this turns the LED green when in the air. Therefore every test starts with
a green light.
- Observe and record the reaction of the LED.
- Before testing the next substance, rinse the two probes by immersing them
in water (deionized or distilled) twice and blott the excess
water from the probes with tissue in between.
- In order to observe the LED better you may want to turn off or dim the lights
when doing the experiment.
- Maintenance: It is important to keep the probes from corrosion.
If corrosion should occur, the corrosion should be carefully removed with
a wooden toothpick.
- Testing: Test the instrument by pressing the button, the
LED should turn green when in the air. In addition you can test it further
by touching the tips of the two probes to a coin or a peace of metal. If the LED Water Conductivity Meter is working properly, the LED
will glow red.
Possible Applications
Water Purification
Riverse Osmosis
Distillation
De-Ionization
Warranty
We will repair or replace (our option) defective units for free, for
up to one full year from date of purchase. Simply call us first so we can look
up when you bought the unit and give you a Merchant Return Authorization, then
mail your unit with a copy of your receipt and a brief description of the problem,
postage prepaid, to Source of Health, Inc., POB 161080, San Diego CA 92176-1080.
We suggest you mail your unit using insured transport as we can not be responsible
for items lost in the mail. You may have other rights which vary from state
to state. This warranty is void if the device has been damaged by accident or
unreasonable use, neglect, improper service or other causes not arising out
of defects in material or workmanship. Full refund within 30 days of purchase
if not satisfied. (Shipping and handling is not refundable)
Made by Source of Health, Inc.
Recommend to Friend!
|
